The universal conformal coating for printed
A fast drying, transparent, acrylic coating, with good dielectric properties. It shields printed circuit boards or other parts from corrosive (atmospheric) influences. This film protects printed circuit boards from leakage currents and short circuits.
| Ref. | Size |
| 74313 | Aerosol 400 ml |
PLASTIK 70 offers robust protection for printed circuit boards with a high dielectric strength of 80 kV/mm. Its moisture-resistant acrylic resin effectively insulates sensitive electronic components, reducing the risk of electrical failures caused by environmental factors.
Convenient and Quick ApplicationThis spray-on coating is touch dry in approximately 15 minutes and reaches full cure within two hours, enabling rapid turnaround for maintenance or manufacturing tasks. The manual spray operation ensures easy, targeted coverage for professionals and technicians alike.
Reliable Performance and ComplianceWithstanding temperatures up to 120C, PLASTIK 70 maintains performance under harsh conditions. Its RoHS-compliant formula and good adhesion make it a trustworthy solution for industrial and commercial users, while the transparent finish preserves component labeling and appearance.
FAQ's of PLASTIK 70:
Q: How should PLASTIK 70 be applied for optimal electronic protection?
A: For best results, spray PLASTIK 70 evenly onto clean, dry surfaces of PCBs or electronic components. Hold the aerosol can at a distance of about 20-30 cm and apply in light, even coats. Allow each coat to become touch dry (about 15 minutes) before applying additional layers.
Q: What are the primary benefits of using PLASTIK 70 on PCBs?
A: PLASTIK 70 provides high electrical insulation, excellent moisture resistance, a fast-drying colorless film, and good adhesion. These qualities protect PCBs and electronic parts from environmental damage, ensuring long-term device reliability.
Q: When is it safe to handle components after applying PLASTIK 70?
A: Components are touch dry approximately 15 minutes after application and can be handled gently. For complete protection and to avoid potential damage, allow the film to fully cure for two hours before routine use or assembly.
Q: Where should PLASTIK 70 be stored to maintain its effectiveness?
A: Store the PLASTIK 70 aerosol can in a cool, dry place below 50C. Ensure the container is tightly closed and kept away from sources of ignition due to its highly flammable propellant.
Q: What processes should be followed to ensure safety during application?
A: Apply PLASTIK 70 in a well-ventilated area, away from open flames or sparks. Use protective gloves and avoid inhalation of spray vapors, as the product is highly flammable and contains volatile organic compounds.
Q: What is the recommended shelf life for PLASTIK 70?
A: PLASTIK 70 maintains optimal performance for up to two years when stored unopened and under suitable conditions, such as in a cool environment away from direct sunlight and heat sources.
