Electric Pump for waste oil evacuation
Flexible impeller design enables pumping high viscosity fluids at high flow rate
Motor with thermal overload protection to prevent over heating
Self priming ZAMAC body can handle a wide variety of fluids
Suction and Discharge Ports
Dual threads: 3/8"
NPT thread (F) and 3/4"-11.5 NH(M)
Ideal for pumping used engine oil, transmission oil, hydraulic oil etc.
Available in the following options
- 220V, 50Hz AC
- 12V DC
Duty Cycle
45 min ON / 45 min OFF
WETTED COMPONENTS
ZAMAC, Stainless Steel, Nitrile Rubber, Neoprene
RECOMMENDED USE
Used Oil, Engine Oil, Transmission Oil, Hydraulic Oil, Water, Ethylene Glycol
DO NOT USE WITH
Gasoline, any flammable media
VARIANTS
| | EWOP/220/EU | EWOP/12 |
| FLOW RATE | 23 LPM (6 GPM) | 17 LPM (4.5 GPM) |
| MAX. PRESSURE* | 18 PSI (1.25 BAR) | 18 PSI (1.25 BAR) |
| SUCTION LIFT (DRY/WET) | 6' (182 cm) /8' (243 cm) | 6' (182 cm) /8' (243 cm) |
| DISCHARGE HEAD (WATER) | 40' (12.2m) | 40' (12.2m) |
| MAX. VISCOSITY | 2000 SSU (SAE 30) | 2000 SSU (SAE 30) |
| POWER CABLE LENGTH | 6' (182 cm) | N/A |
ORDERING INFORMATION
| CAT NR. | ORD NR | INPUT POWER | BOX QTY. |
| EWOP/220/EU | 45851 | 220V, 50HZ AC | 4 |
| EWOP/12 | 45852 | 12V DC | 4 |
Efficient Waste Oil HandlingThis electric pump is designed specifically for industrial and automotive settings, enabling quick and efficient transfer or removal of waste oil, used engine oil, diesel, or kerosene. With a robust flow rate, generous suction lift, and durable construction, it ensures reliable operation in demanding environments.
Built for Safety and DurabilityEquipped with IP44 protection, B-class insulation, and a thermal overload protector, the pump guarantees secure usage and long service life. Its anti-corrosive coated cast iron body enhances durability, while the compact and portable design makes it suitable for both stationary and mobile applications.
FAQ's of Electric Waste Oil Pump:
Q: How do I operate the Electric Waste Oil Pump safely?
A: To operate the pump safely, ensure it is connected to a 220V power source and the fluids used are suitable, such as waste oil, used engine oil, diesel, or kerosene. Avoid handling flammable fluids other than those specified. Always make sure the pump is placed securely on a stable surface and do not exceed the maximum flow rate of 40 L/min. The built-in thermal overload protector and IP44 rating provide additional safety.
Q: What types of fluids can this pump handle?
A: This electric pump is suitable for transferring waste oil, used engine oil, diesel, and kerosene. It is not recommended for fluids with high viscosity or those outside its chemical compatibility range, such as gasoline or water.
Q: Where is this pump most effectively used?
A: The pump is primarily designed for use in industrial and automotive workshops within India. Its portable and table-mounted design makes it convenient for locations where waste oil removal or transfer is frequently required.
Q: What are the main benefits of using this electric pump?
A: Key benefits include efficient and rapid fluid transfer, robust anti-corrosive construction for longevity, portable operation for flexible use, and built-in safety features such as a thermal overload protector and IP44 protection. It also offers automatic operation, reducing manual effort.
Q: Can I adjust the speed or flow rate on this pump?
A: No, the Electric Waste Oil Pump operates with a fixed speed and flow rate. It does not include variable speed settings, ensuring consistent performance up to its rated maximum of 40 L/min.
Q: What steps should I follow for maintenance or to ensure longevity?
A: Regularly check the pump for any signs of wear or leaks, keep the inlet and outlet clean, and avoid running the pump dry. After use, disconnect it from the power source and store in a dry, clean area. Periodic inspections of the cable and motor are recommended for optimal performance.
Q: Is this pump easy to move and set up in different locations?
A: Yes, weighing only 6.5 kg and featuring a portable mountable design, this pump can be effortlessly relocated and set up wherever needed within your workshop or industrial facility.
