General use release agent.
A general purpose release agent for all thermoplastics and many types of rubber. It is highly versatile as a release agent, ensuring accurate mould detail and improving surface finish without building up in the mould.
- Improves surface finish, minimizes imperfections and enhances even well-polished tool release properties
- Operational to +200°C
- Can also be used as an anti-stick agent in the textile, foam converting, printing and shoe industries
| Ref. | Size |
| 32836 | Aerosol 500 ml |
CRC SR MULTI provides an efficient and consistent silicone film on molds, drastically reducing sticking issues during plastic and rubber molding processes. Its quick-drying nature improves productivity by minimizing downtime between cycles and reducing defects in finished goods. The non-staining, colorless finish ensures components remain visually appealing and unmarked by residue.
Versatile Lubrication and ProtectionThis multi-purpose agent extends beyond mold release - it works as a lubricant and a protective coating for various applications. Whether used on machinery, equipment, or moving parts, it helps in reducing friction, wear, and corrosion. The silent and easy manual spray application ensures precise control and minimal waste.
Safety and Compliance You Can TrustCRC SR MULTI meets stringent industrial standards, ensuring both user safety and reliable performance. Its non-toxic, ready-to-use formulation is suitable for diverse industrial environments. Always follow storage guidelines-keep the aerosol away from heat sources and store in a cool, dry place to preserve its effectiveness throughout its three-year unopened shelf life.
FAQ's of CRC SR MULTI (SILICONE RELEASE MULTI):
Q: How should CRC SR MULTI (Silicone Release Multi) be applied?
A: Simply shake the can and spray a light, even coat directly on the clean mold or surface from a distance of about 20-30 cm. Allow it to dry before beginning the molding or lubrication process. The aerosol format allows for quick and easy manual application.
Q: What are the main benefits of using this multi-purpose release agent?
A: CRC SR MULTI ensures easy release of molded plastic and rubber parts, reduces production delays due to sticking, provides effective lubrication, and forms a protective layer that helps prevent corrosion and wear. Its clear, colorless, non-toxic, and non-staining characteristics preserve material appearance and integrity.
Q: When should CRC SR MULTI be used in the molding process?
A: Apply the product just before starting the molding cycle, ensuring the surface is clean and free from previous residues. For best results, reapply as needed between cycles, particularly if components start to stick or after cleaning the molds.
Q: Where is the best place to store CRC SR MULTI aerosol cans?
A: Store the cans in a cool, dry area away from direct sunlight, open flames, or heat sources to maintain product quality and ensure safety, as the product is highly flammable. Always keep the canister tightly closed when not in use.
Q: What safety precautions should be taken when using this highly flammable aerosol?
A: Ensure adequate ventilation during use, keep away from ignition sources, and never spray near an open flame or hot surfaces. Do not puncture or burn the can, even after use, and avoid inhaling the spray directly. Refer to the product's safety datasheet for further guidance.
Q: Can CRC SR MULTI be used for non-mold related applications?
A: Yes, aside from being a release agent, CRC SR MULTI can be used for general lubrication and as a protective coating for various machinery, tools, or surfaces requiring reduced friction and protection against moisture or dirt.
Q: What is the expected shelf life and coverage area of CRC SR MULTI?
A: The product has a shelf life of approximately three years when unopened and stored correctly. Coverage area depends on application thickness and frequency, but the 500ml can typically lasts for multiple cycles or applications.
