PTFE lubricant for dry lubrication and use on plastic friction points.
CRC Dry Lube is a fast drying dispersion of white, waxy PTFE particles, leaving a dry lubricating film on the surface. The product exhibits outstanding anti-stick and release properties. As a lubricant, it is most effective at reduced speeds and low loads.
| Ref. | Size |
| 30519 | Aerosol 500 ml |
CRC DRY LUBE utilizes advanced PTFE technology to create a durable, dry lubricating film that greatly reduces friction without attracting dust or grime. This clean and non-staining lubricant is ideal for components where maintaining cleanliness is essential, such as electrical contacts and textile machinery. Its dry film forms rapidly, streamlining maintenance routines and enhancing operational efficiency.
Superior Corrosion and Water ResistanceFormulated for maximum protection, CRC DRY LUBE offers excellent corrosion and moisture resistance, repelling water to safeguard metal parts in demanding industrial and outdoor environments. Its resilience against harsh conditions extends equipment lifespan and reduces the frequency of reapplication, saving time and maintenance costs.
Safe, Versatile, and User-FriendlyDesigned for manual spray operation, CRC DRY LUBE features a non-conductive, low VOC, and odorless formula, making it suitable for sensitive applications in electronics, food processing (incidental contact), and automotive sectors. Its clear formulation ensures no staining or visible residue, making it discreet for applications where appearance matters.
FAQ's of CRC DRY LUBE:
Q: How do I properly apply CRC DRY LUBE for best results?
A: Shake the aerosol can well, then spray CRC DRY LUBE evenly onto the clean, dry surface from a distance of 15-30 cm. Allow a few seconds for the film to dry before operating the equipment. For optimal performance, avoid excessive application and reapply as needed depending on use and environmental conditions.
Q: What surfaces and components can CRC DRY LUBE be safely used on?
A: CRC DRY LUBE is suitable for use on chains, slides, conveyors, hinges, gears, locks, and bearings. Its non-conductive, PTFE-based formula makes it safe for use on electrical and electronic components, as well as in food processing areas where incidental contact may occur.
Q: When should I choose CRC DRY LUBE over traditional wet lubricants?
A: Choose CRC DRY LUBE where a clean, non-staining, and dust-resistant solution is required. Unlike wet lubricants, it does not attract dirt or form sticky residues, making it preferable for environments demanding cleanliness, such as textiles, electronics, and food processing.
Q: Where should CRC DRY LUBE be stored to maintain its shelf life?
A: Store the unopened aerosol can below 50C, away from direct sunlight and sources of heat. When stored under these conditions, CRC DRY LUBE maintains its effectiveness for up to five years.
Q: What benefits does CRC DRY LUBE offer for industrial and home use?
A: CRC DRY LUBE delivers a rapid-drying, silent, and clean lubrication solution that protects against corrosion and moisture intrusion. Its wide operating temperature range and non-staining characteristics make it valuable for industrial machinery, automotive maintenance, and various home repairs.
Q: Is CRC DRY LUBE safe for use on electrical and electronic equipment?
A: Yes, CRC DRY LUBE is non-conductive and designed for safe use on electrical and electronic equipment, providing lubrication without risk of electrical shorts or residue buildup.
